97-01 CRV Camber Correction With OE Control Arms
SKU:
$299.95
$299.95
This is another kit that will correct the camber of all four wheels on the 1997-2001 CRV after the 2" lift kit is installed. Unlike the other camber kit offered on our online store, rather than aftermarket aluminum rear arms, new premium MOOG steel arms are used to replace the rear OE control arms. This is paired with the same 3 degree ball joint from the other camber kit. Please remember the adjustment range is -1 to -3 so there will need to be at least 1/2" of lift installed on the car to use this product.
The advantage of this kit is that it will prevent any troubles related to the front camber arm bumping the coil spring. However, the front OE arms need to be removed and have the existing ball joints popped out, this can be done with a rented ball joint press from your local auto parts shop. The new ball joints are a bolt-in install. Keep in mind these ball joints are designed to provide positive camber on lowered vehicles, but when installed backwards (the offset pointing in towards the engine) they will provide negative camber on lifted vehicles.
Please note that this item is exempt from our return policy as we do not directly manufacture them.
The advantage of this kit is that it will prevent any troubles related to the front camber arm bumping the coil spring. However, the front OE arms need to be removed and have the existing ball joints popped out, this can be done with a rented ball joint press from your local auto parts shop. The new ball joints are a bolt-in install. Keep in mind these ball joints are designed to provide positive camber on lowered vehicles, but when installed backwards (the offset pointing in towards the engine) they will provide negative camber on lifted vehicles.
Please note that this item is exempt from our return policy as we do not directly manufacture them.
